The IFM06 Fluxmeter measures the total magnetic flux with a coil. A Gaussmeter measures the totalflux density.
- Waveform display on IFM06
- DC/AC Peak Measurement Functions
- Automatic Drift Correction
- USB, RS232 and CANopen
- Automatic Probe recognition
- Analogue Out
- PLC Digital Interface
- 30,000 Count Resolution
- Pass Limit Testing
When would you need a Fluxmeter?
To check a magnetisation process
A magnetised magnet is placed in a coil. The Integrator is reset. The magnet is removed to give a measurement of the total magnetic flux on the Integrating Fluxmeter.
To determine total flux, with Helmholtz coils (produces anarea of superior uniformity)
A Helmholtz coil pair is connected to an Integrating Fluxmeter. The sample to be tested is placed within the pair of coils and rotated. The Integrating Fluxmeter determines the total magnetisation of the sample and displays thisvalue on its screen.
IFM06 Fluxmeter Features
The Fluxmeter is specifically for measuring Magnetic Flux Linkage where a surface reading with a Gaussmeter is not sufficient. The Fluxmeter is a static solution to characterising components with high accuracy.
The IFM06 Fluxmeter has automatic and manual drift correction availableand can be used in environments where rapid measurements are necessary. The IFM06 has waveform display functions to enable real time viewing of data ideal for quality control applications. RS232, USB, CANopen and PLC interfaces are included as standard. Full instrument control is possible via these interfaces enabling full factory automation.
The IFM06 can measure magnetic flux, magnetic flux density or magnetic field strength.
Automatic Identification - Search Coil supplied byHirst Magnetic Instruments Ltd can be pre-programmed with Serial Number and Area turns product for automatic probe identification and system set-up.Additional blank probe plugs can be purchased for user pickup coils that can also store turns area product for automatic set-up of user created pickup coils.
Waveform Display - The IFM06 can sample in two speed modes2KHz and 20KHz, with software and TTL triggering the internal cache enables long waveforms to be recorded and viewed with approx 2 seconds recording available at the 2 KHz sample rate.
PLC Interface - The PLC interface offers a simple method for the control and integration of the IFM06 into existing equipment. 24v logic signals are available to start measurements and to return the results of pass window testing.
Communications - The IFM06 support communications via either RS232, CANopen or USB. Base driver software is supplied with example applications (complied for WIN32 systems), source code and protocol documentation.With USB data can be captured at up to 10,000 samples per second in raw PCM format.
Extra Options Available - Pickup coils and Helmholtz coils designed specifically for your application and use with the IFM06 can be designed and built by Hirst Magnetic Instruments Ltd.
|Accuracy||+/-0.5% (DC) Traceable|
|Units||Vs, Wb, Mx, Tesla*,kA/m*, Oersted*, Gauss* * With calibrated coil|
|Range vs Products to full scale - Range 1||+/- 1.00000 mVs resolution 10nVs|
|Range vs Products to full scale - Range 2||+/- 10.0000 mVs resolution 100nVs|
|Range vs Products to full scale - Range 3||+/- 100.000 mVs resolution 1uVs|
|Range vs Products to full scale - Range 4||+/- 1.00000 Vs|
|Functions||DC, AC, DC Peak, AC Peak, (AC sampled at 2kHz)|
|Analogue Outputs||+/- 5V|
|Display||7” touch screen graphics display updated showing waveforms of current measurement|
|Operating Temperature Range||+5° C to +40° C|
|Power Supply||90-264 VAC / 47-63 Hz|
- Brand: Hirst Magnetic Instruments Ltd.
- Product Code: IFM06
£4,600.00 + VAT* + Shipping
* Where applicable